电缆夹又名电缆固定架，是一种应用于采煤机中电缆与水管托移与保护用的装置。
原理
principle
编辑
edit
电缆夹由夹体、弹簧、销轴和开关销等组成，夹体的H型上下内侧各开有一个导向槽，在导向槽的两端开有上下对应的4个方孔，夹体的一侧是两个并行的联接板，另一侧有一个联接板，在每个联接板上都开有相同孔径的圆孔。它的夹体采用了以钢板为骨架，表面溶注尼龙材料制成，外形则为中心牵引式不对称的H型结构。电缆夹固定电缆与水管的方法是采用弹簧卡锁固定方式实现的。本实用新型适用面广，可在高档普采与综采上使用。
The cable clamp consists of a clamp body, a spring, a pin shaft, and a switch pin. There is a guide groove on the upper and lower inner sides of the H-shaped clamp body, and four corresponding square holes are opened at both ends of the guide groove. On one side of the clamp body, there are two parallel connecting plates, and on the other side, there is a connecting plate. Circular holes with the same aperture are opened on each connecting plate. Its clamp body is made of steel plate as the skeleton, with nylon material dissolved on the surface, and its appearance is an asymmetric H-shaped structure with a central traction. The method of fixing cables and water pipes with cable clamps is achieved by using spring locking. This utility model has a wide range of applications and can be used in high-end conventional mining and fully mechanized mining.
